3/4 & Full DTM Angel Eyes
You are looking at our newest and best product – 3/4 or Full LCI style DTM square BavGruppe Design flat bottom DTM Angel Eyes, based on the BMW F82 M4 M Series OEM LED angel eyes.
This newest, revised design incorporated gel covers over the widest, clearest, and most beautifully crafted LED rings on the market!
Bavgruppe Half X or Full X Concept System: ADD ON Kit (Click to expand)
These kits will integrate with virtually any Ring System we sell.
This system comes with Half X or Full X Inserts that can be placed in front of your Rings for a truly bad ass look. These come in Red/White or Blue white, and can be controlled with our included key fob. All X Concepts now come with a full acrylic clear cover for that true OEM look.
System includes:
- 4 Half or Full Concept X LED’s with drivers (2 per headlight);
- 2 Keyfobs to control color shifting modes (default mode is White);
- Half X/Full X mounting hardware.
NOTE #1: Our Full X Inserts will NOT work with any Xenon System or any LED System that has a projector lens, as the projectors will square hit the X, and cause premature malfunction and failure. They can only be used with pre LCI F32/F82/F80 BMW LED headlights and some halogen systems, please inquire before purchasing. If using with halogen headlights, you MUST upgrade the lowbeam bulbs to LED to prevent melting premature failure of the X, as the bulbs will output extreme heat to the X/Half X and cause premature failure of the plastics (melting/warping) and/or LED failure.
Compatibility
- BMW E60 5 Series – PRE LCI AND LCI
- BMW E82 135I (PRE LCI and LCI MODELS, recommend an eyebrow with pre LCI models)
- BMW E90 335I, 328I (PRE LCI AND LCI MODELS, pro install highly recommended for Pre LCI E90)
Features
- Closely spaced SMD LED lights
- 3 times as bright as OEM BMW LED angel eyes
- 6000K pure white color or RGBW/RGBW-A color shifting
- Off board drivers, so no individual LEDs will fail
Included
- Four Gel covered DTM (Full or 3/4)
- 2 ring drivers (1 per side)
Additional Important Information: (Click to expand)
If not using one of our plug and play harnesses (purchased separately), and are wiring directly to the angel eye circuit, you must code out the following items to avoid issues:
- Cold bulb check
- Angel eye out error code;
- Code angel eyes/driving lights to 12.6 for max brightness;
- Code off turn signal so it only lights when using the turn signal.
Specific codes to clear are below (Carly will NOT clear all necessary codes on some difficult FRM’s). Those are all you need for the brightness/voltage issue – if the below coding is not done when the low beams are on it’ll drop the voltage to sub 10V (from factory) and there will be some nasty flickering.
- PWM_SL_V
- PWM_RL_BL_1_FKT_SL
- PWM_RL_BL_1_FKT_BL
- PWM_RL_BL_1_FKT_PARKL
- For basic coding on E Series chassis, Carly is usable. For advanced coding like retrofits or value changes BMW standard tools is the preferred tool.
- For basic coding on F Series chassis, BimmerCode is the preferred coding software. For advanced coding or value changes ESYS with premium launcher and token master rearm is preferred.
NOTE: For Color Shifting Models, we HIGHLY recommend purchasing the plug and play harness below if you do not have access to coding in your area, as you will almost certainly need it due to many BMW FRM modules being overly sensitive:
________________________________________________________________________________
RGBW Info: If purchasing RGBW, download your app below. The apps will work with Android or Apple phones. Click on your corresponding app below to download. For E Series models using the original angel eye plug, coding off of all bulb check codes will be mandatory to ensure the FRM doesn’t interfere with the BT module:
For Color Chasing Products, download the below:
Returns: Due to the nature of these electrical specialty items, we do not accept returns, but will gladly exchange defective products.
Reviews
There are no reviews yet